Tips For Replacing a Window Handle
It is easy to replace your window handle from the at-home comforts of your home. Use these helpful tips to ensure an easy operation and a beautiful look.
Remove the screw covers from your uPVC handle to reveal the screws. Measure the spindle's length to ensure you get the correct size replacement.
1. Determine the length of the Spindle.
If you're replacing a window handle it's important to get the size of the spindle correct. This is because it can affect how tight or loose the handle is and whether it's able to lock properly within the frame of the window. The spindle is a metallic shaft that connects the handle to the lock on the window frame. The spindle could be a standard 8mm cross-section in the industry or older 9mm versions. The modern industry standard is 8mm however this was not always the case, so when purchasing a new handle, it's essential to check the dimensions.
The easiest method of measuring the length of the spindle is to remove the existing handle and this can be done by turning it into the open position, then unscrewing the two screws (which could be hidden behind plastic caps that will need to be removed) that hold the handle. After removing the handle, you can measure from the base of the handle to the end of the spindle. This will give you the measurement needed to buy a replacement.
There are plenty of choices when it comes to choosing the right window handle from sleek chrome that fits in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curled monkey tail locks! The options are endless but the most important thing is to select a style that is suitable for your home.
Espag handles are usually fitted to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles can vary from 58mm to 62mm but luckily there are replacements available for both sizes. Cadenza window handles have a different size because they have an angled blade which operates an interlocking mechanism that is multi-point inside the window.
When choosing a window handle it is important to consider the hand you use to open your door. Inline Espag window handles aren't handed and can be used for left or right handed windows. Cranked window handles are only compatible for windows that are open in one direction.
2. Remove the Handle
If the handle is damaged or simply worn out or simply worn out, a window handle that is shattered can be a real pain. The good news is that replacing the uPVC window handle is a simple job that you can do yourself. You only need some basic hand tools and some time to complete the task.
First of all, you have to open the window and ensure that it's in an unlocked position. Then, take off the screw caps that hold the handle in place. After these have been removed, you are able working on removing the handle itself.
The handle itself is attached to a spindle inside the window frame. Depending on the kind it is secured with a screw or pin. The most commonly used types of handles are inline Espagnolette handles and the cockspur handles. Both of these types of handles are utilized on casement windows, including aluminium windows. They can be locked by using keys to stop unauthorised opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle you will need to use a flat blade screwdriver to remove the clip that holds the handle. After the clip has been released, the handle should be able to slide off the spindle. Once the old handle is removed, you will need to measure the length of the spindle in order to ensure that your new handle is compatible with this measurement.
Once you have the correct size, you are able to fix the new handle into the correct position. It is crucial to make sure that the handle is securely attached and that it rotates in the proper direction (clockwise when the handle is open, or counterclockwise if the handle is closed). It is important to make sure that the handle has not been placed upside down.
Replace the screw caps. After you've done that then you can test the handle to confirm that it works correctly. Also, you should test the locking mechanism by moving the handle from the locked position and then returning it to the locked position.
3. Remove the Screws
A uPVC handle is an important element of any home and is the first thing that shows signs of wear or damage. This can be caused by natural elements or by frequent use, and sometimes deliberate damage by opportunistic criminals who seek to open a closed window and gain access to your property. A simple replacement can solve the problem and prevent it from happening again.
uPVC handles could also be difficult to remove when the locking mechanisms aren't functioning correctly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism, rather than the whole handle. This can save you money.
After you have removed the handle, you'll need to remove the screws that secured it. They're usually on the inside of the base. You may need to use a screwdriver to accomplish this and it's crucial to not over tighten, as this could cause the handle to become loose.
You will then need to locate the fixing screws or pins that hold the new handle in the correct position. These are likely to be located on the inside of the base of the handle and you'll need either a screwdriver or pair of pliers to remove them. If you'd like to replace them, you should replace the screw caps and test the handle to make sure it works properly.
When you're ready to install the new handle, simply line up the spindle with the cut-out in the window mechanism and screw it in the right position. Make sure the handle is in an open position and that the screws are secured before replacing the screws' covers, should you wish to do so. Once door handle repairs near me 've completed this, you're done and can enjoy your newly replaced window handle. I hope this will enable you save money on window and door replacements in the future. Contact us if you need more information on this or any aspect of your uPVC window.
4. Fit the New Handle
The procedure of replacing a damaged window handle or updating it is simple and can be accomplished in a few easy steps. Identifying the kind of window handle, determining the length of its spindle and knowing the tools you'll require to finish the job are crucial. Safety is always the top priority when working with tools and windows. Be sure to follow the steps and ensure that you have an appropriate handle for use.
The first step is to find the screws that hold your existing window handle in place. Then, take them out, while maintaining a safe hold on the handle itself to stop it from falling suddenly and causing injury. Once the screws have been removed, you can put them in a safe location to be replaced in the future.
After you have removed the handle, you can begin to install your new one. The handle must be perfectly positioned in order to function correctly and keep the window in its closed position. Next you need to slide the square metal bar attached to the handle into the hole for the window mechanism.
The last step is to replace the screws caps and then test the handle to ensure it works. If you're not satisfied with the result or if the window doesn't open and close as it should the next step is to call our experts who can help.
Almost all UK homes have uPVC Windows. As such, many will require replacement at some point because of damage or wear. The procedure is simple and can be carried out by anyone with some experience in DIY. It is crucial that the handle you use matches the dimensions and style of the window. If you're not sure about the type of handle you require, don't hesitate to get in touch with our team who will be able to help you navigate the various possibilities available.